>

Automotive training electrically controlled gasoline engine trainer teaching equipment

P.N.:GTAT-1001

Technical parameter

1. Dimension: 1400x1000x1800mm; (L x W x H)

2. Working power: 12V/60AH battery

3. Working temperature: -40℃~50℃

4. Fuel tank capacity: 10L

5. Suitable car or engine models listed below:

P.N.

Car model

P.N.

Car model

GTAT-1001-001

Jetta 1.6L

GTAT-1001-006

Magotan TSI

GTAT-1001-002

Santana AJR

GTAT-1001-007

Honda FIT

GTAT-1001-003

Passat 1.8T

GTAT-1001-008

Buick Excel

GTAT-1001-004

Toyota Corolla 2ZR-FE

GTAT-1001-009

Sagitar TSI 1.4

GTAT-1001-005

Toyota Vios 8A-FE

GTAT-1001-010

Audi A6

Product description
The trainer displays the basic principles and structures of electronically controlled gasoline engine, and simulates its operation.



Product Detail

Product composition

Gasoline engine assembly

1PCS

ECU

1 PCS

Dashboard

1PCS

Fault insert module

1PCS

Battery

1PCS

Training panel with circuit schematic

1PCS

OBD diagnostics seat

1PCS

Related accessaries for starting engine

1PCS

Mobile stand

1PCS

Main features

1. Normal engine operation, starting, idling, acceleration, deceleration, fault detection and diagnosis, fault simulation, and can rule out the condition of the actual operation.

2. Fault simulation systems can simulate actual operating conditions, common failure to set a variety of real car engine.

3. The voltmeter can show the real-time change of the sensors and actuators and the injector pulse displays the working status of oil of the original device through the LED light.

4. Pointer fuel oil pressure gauges indicate pressure value and pointer vacuum gauge indicates vacuum pressure value.

5. With the diagnosis of the original car seat, it can use computer diagnostic equipment to read fault codes and data flow of the engine control system.

6. The training bench panel with 5MM quality aluminum plate fine spray color circuit schematics will not change its color or fade or deform for more than 10 years. The nice arge nt material package side is better than retrofitting plexiglass system (The plexiglass is easy to break or deform due to the time and environment.).The students can understand and analyzing how the control system works directly by looking at the circuit diagram and the engine.

7. The detecting terminal is mounted on the panel of the training bench. Each of the sensors, actuators can be detected directly on the panel. The engine controls unit pin electrical signal, such as the resistance, voltage, current, frequency, waveform signals and the like.

8. The training panel is installed with the main power switch, tank guard, flywheel and other rotating parts shields to protect the students and teachers.

9. The base portion of the training panel is welded with steel structure .The panel cabinet is stamped and it is separable from the base. The bench surface has used the paint technology with a direction of self-locking casters device.

10. Fault setting function:  

The user can choose the fault setting function. Manual fault setting or intelligent fault-setting can be used to test the equipment. (Equipped with a communication interface and network interface)


Show