>

Engine training bench gasoline engine and automatic transmission trainer/automotive training equipment

P.N.:GTAT-1005

Product description

The trainer displays the basic principles and structures of electronically controlled gasoline engine with automatic transmission, and simulates its operation.


Product Detail


Technical parameter

1. Dimensions: 1260x850x1860mm

2. Suitable car or engine models listed below:

P.N.

Car model

P.N.

Car model

GTAT-1005-001

Jetta 1.6L

GTAT-1005-006

Magotan TSI

GTAT-1005-002

Santana AJR

GTAT-1005-007

Honda FIT

GTAT-1005-003

Passat 1.8T

GTAT-1005-008

Buick Excel

GTAT-1005-004

Toyota Corolla 2ZR-FE

GTAT-1005-009

Sagitar TSI 1.4

GTAT-1005-005

Toyota Vios 8A-FE

GTAT-1005-010

Chery A3


Product composition

Gasoline engine assembly

1PCS

Transmission assembly

1PCS

ECU

1 PCS

Dashboard

1PCS

Fault insert module

1PCS

Battery

1PCS

Training panel with circuit schematic

1PCS

OBD diagnostics seat

1PCS

Related accessaries for starting engine

1PCS

Mobile stand

1PCS

Main features

1. Real running electronically controlled gasoline engine with automatic transmission;

2. It truly shows the structure and the working process of the gasoline engine.

3. The pressure gauge installed on the laboratory bench panel shows the fuel pressure

4. The digital meter shows the voltage change of each sensor.

5. The injector pulse and a throttle opening degree of change value are displayed clearly by the LED lamps.

6. Bench panel contains complete electronic control system schematics and detection terminal. Various sensors, actuators, and other signal parameters, voltage, resistance, frequency, etc. can be detected by instruments

8. The panel is equipped with a combination of instruments, speedometer and the main oil pressure gauge, which fully demonstrates the value of speed change, automatic transmission stalls and the main oil gallery pressure change value.

9. Light-emitting diodes installed on the panel is used to display stalls changes.

10. It can test the stall and delay of the automatic transmission.

11. Diagnostic block installed on the bench can be connected to a dedicated or universal auto decoder. And self-diagnostic functions like reading fault codes from the electronic control system, clearing fault code and reading data stream can be carried out.

12. Fault setting function: Multi-function switch, intelligent integration system or intelligent fault set appraisal system can be set according to the user optional manual in order to test the equipment. (Equipped with a communication interface and network interface)

13. After setting the fault, the trainees can use the dedicated instrumentation to check out the location and content of the failure through the fault troubleshooting exercises.

14. It is equipped with safety devices such as the power switch, tank guard and the output shield. (Different models can be produced according to users’ requirements)

 

 

 

 

 

 

 




Show