PLC Controlled Pneumatic and Hydraulic Training Test Bench Equipment for sale


Product description

1. The experimental device uses double-sided structure, is an experimental table provides places for doing pneumatic and hydraulic test experiment for two groups of four students. It can simultaneously do double-sided comprehensive pneumatic and hydraulic experiments, optimizing and sharing resources and improving products’ performance. Its overall structure is simple and practical.

2. The training equipment is iron double matte dense spray pattern, which is beautiful, durable and practical. The basic configuration is as following: 1 set of pneumatic training components; 1 set of pneumatic PLC control module; 1 piece of low noise air compressor; 1 set of hydraulic training components; 1 set of hydraulic PLC control module; 1 piece of hydraulic test pump. The optional configuration is the computer.

3. This training system uses a dedicated independent hydraulic test pump with variable speed DC motor system with oil pressure setting function. You can set safe working pressure of output oil pressure. With all common hydraulic components: Each hydraulic component is equipped with mounting plate, which can be easily and freely placed in the aluminum alloy hydraulic components on the panel (the panel with "T" slot in the form of aluminum alloy structure). Oil lap using quick-change connectors; convenient disconnect without leakage.

4. With this set of training equipment, you can do pneumatic control and hydraulic control circuit and its corresponding basic application experiments. It can also be integrated with each other to carry out the following experiment: realized pneumatic - electric control, pneumatic - hydraulic control, electric - fluid control, and pneumatic - electric - hydraulic integrated control.

Product Detail

Pneumatic part

Technical parameter

1. Training Equipment dimension: About 1500mm × 900mm × 1700mm

2. Working power: AC 220V 50HZ

3. DC power: input AC220V, output DC 24V/2A

4. Air compressor

● Motor power: 250W, AC220V

● Nominal capacity: 10L

● Rated output voltage: 1Mpa

Basic experiments

1.   1. The reversing loop of single acting cylinder

2. The reversing loop of double acting cylinder

3. Single acting cylinder speed control loop

4. Single phase speed control loop of double acting cylinder

5. Double acting cylinder speed control loop

6. Speed switching loop

7. Buffer loop

8. Secondary pressure control loop

9. Counting loop

10. Delay loop

11. Interlocking loop

12. Single cylinder and single reciprocating control loop

13. Single cylinder continuous reciprocating action loop

14. Sequential action loop of a straight cylinder and a rotating cylinder

15. Multi cylinder sequential working loop

16. Double cylinder synchronous action loop

17. Four cylinder linkage loop

18. Unloading loop

19. The application loop of the “OR” gate shuttle valve

20. The application loop of the fast exhaust valve

21. High and low voltage switchover control loop

22. Overloading protection loop

Hydraulic part

Technical parameter

1. Training equipment dimension: About 1500mm × 900mm × 1700mm

2. Working power: AC220V 50HZ

3. DC power: input AC220V, output DC24V/3A

4. Hydraulic pump:

● Motor power: 400W

● Adjustable speed range: 0-1500RMP

● Dimension: 550mm × 350mm × 450mm

5. The hydraulic pump works with a distance of 1.5m from the hydraulic table, the distant noise is 58Db

Basic experiments

1. The reversing loop by using reversing valve

2. The locking loop by using “O” functional reversing valve

3. The locking loop by using hydraulic controlled one-way valve

4. Pressure setting loop

5. Two stage pressure loop

6. Reducing loop by using reducing valve

7. Boost loop by using pressure cylinder

8. Unloading loop by using reversing valve

9. The oil inlet throttling speed regulating loop

10. The oil return throttling speed regulating loop

11. The variable pump speed regulating loop

12. Compound speed regulating loop with gear pump and speed regulating valve

13. Speed transition circuit with short connected flow valve

14. Two times feed loop in series of speed regulating valve

15. Two times loop parallel to the speed regulating valve

16. Sequent circuit by using sequence valve

17. Sequent circuit by using pressure relay

18. Sequent circuit by using electrical stroke switch

19. Sequent circuit by using motion valve